Taylor Rental of Wallingford, CT
Product Catalog
Husqvarna® Tile Saw
TS 70 is the perfect choice for fast and effective cutting materials up to 28 inches in length. A versatile saw perfect for both large and small tile and can make 22,5 degree and 45-degree miter cuts. The optional adjustable stand enables one person to move TS 70 around the job-site. The water management system minimizes water use for a clean work area. The machine is equipped with a separate water tank which supplies all water needed and facilitates the slurry sedimentation. Delivered with VARI-CUT™ tile blade.
Please contact us for current pricing and availability.
Mac3 P9 Latch 20 lb. Chipping Hammer (Hex 7/8" x 3 1/4" Shaft Size)
Great for small demolition (cement, tiles, renderings, coatings), preparation of walls and floors, cleaning concrete castings, facades, and roughening.
Please contact us for current pricing and availability.
Cable Puller, Come-A-long, 2 ton pull
- Capacity 2 ton
- Cable 3/8"
- Leverage 36:1
- Pull 6'
Please contact us for current pricing and availability.
Fish Tape, Plated Carbon Steel, Cable Snake, 120' x 1/8''
Fish tape ball helps guide through tricky bends and is desiged to pull up to 500 lbs. Use to pull wire thru conduit or framing to install electrical boxes, outlets, lighting fixtures, doorbells, datacom and security systems.
• A innovative hand trigger assembly provides constant tension during retrieval of tape to wind tightly as it automatically wipes off excess lubricant
• Tape is wound directly into housing, no need to "snap" retaining tapes
• Fish tape ball is designed for easier maneuvering in potentially trick bends
• Four viewing ports on reel tell at a glance how much tape remains
• Tape dimension is 1/8 Inch Wide, 75 Foot Long, and .0625 Inch Thick
Please contact us for current pricing and availability.
Ceramic Tile Carbide Nipping Tool
- Wide bit for shaping tile.
- Carbide cutting edge cuts tile up to 1/2" thick.
- Balanced forged steel construction.
- 5/8" wide offset jaws open with return spring.
- Measures 8" overall.
Please contact us for current pricing and availability.
Roof Shingle Remover,
- Removers multiple layers of shingles
- Leading edge is heat treated for extra strength
- Blade length 10 1/2", Width 10"
- Handle 55"
Please contact us for current pricing and availability.
Wood Router, 120 volts
- 120 Volts
- 10 Amps
- 1/4" Collet
- 24,000 rpms
Please contact us for current pricing and availability.
Measuring Tape 200'
ProTape Open Reel Fiberglass Hand-wind Long tapes have a tough ABS plastic case with contoured rubber grip handle and folding end hook for secure anchoring. 200' with English/Metric.
Please contact us for current pricing and availability.
DD 150-U Diamond Coring System
Simple to understand, and easy to use, the DD 150-U Diamond Coring System allows the operator to drill by hand or with a core stand.
Please contact us for current pricing and availability.
Duo-Fast Stapler
The Model No. CT-859 is a fine, all purpose gun tacker that has been made even better by a handle hold-down clip, an improved staple pusher, and the jaw with the claw. It takes staples up to 9/16”
Please contact us for current pricing and availability.
Duo-Fast Carpet & Upholstery Stapler
APPLICATIONS
Upholstering. Light wood assemblies. Carpet laying, as well as other production-shop applications.
Please contact us for current pricing and availability.
1/2" Impact Wrench
Square-Drive Electric Impact Wrench
Please contact us for current pricing and availability.
4" x 24" Belt Sander
Powerful 11.0 AMP Motor; 84dB
Please contact us for current pricing and availability.
4-1/2 4-1/2" Disc Grinder
7.7 Amp motor, forcible output power (1,430W) for the toughest grinding jobs
Please contact us for current pricing and availability.
1/2" Hammer Drill
Hitachi's DV20V2 hammer/drills with ease through brick, cement, concrete, metal, marble, granite, and other stone materials. It is the fastest, most durable hammer drill in its class.
Please contact us for current pricing and availability.
3/8" angle drill
The D10YB 3/8" Angle Drill drills into various types of metal, wood, plastic resin, stainless steel and similar materials. This model also tightens and loosens small screws, wood screws, nuts and bolts.
Please contact us for current pricing and availability.
Jack, 80" Column 16 Ton, Beam/Roof Support
Jack head travels 15"; steel nibs bit wood surfaces; use wood caps for metal surfaces. Swivel action aids jack placement in difficult locations.
Please contact us for current pricing and availability.
Quik Drive Auto-Feeding Screw Driving System
Fastening has never been as fast or as cost-effective. Collated-screw fastening tools are replacing traditional nail guns for their speed, reliability and power. Quik Drive® auto-feed screw driving systems are easy to use, durable and designed for a wide variety of fastening applications. Featuring quick-loading screw strips, precise countersink adjustment and a patented auto-advance mechanism, Quik Drive tools save time and expense on jobsites every day
Please contact us for current pricing and availability.
DH38YE Rotary Hammer
- 5.2 ft-lbs of impact energy delivering high-speed drilling and forcible chipping
- 8 Amp motor delivers maximum productivity
- 2 modes of operation hammer & drill and hammer only for flexibility within a range of applications
- Sealed grease system ensures minimal maintenance
- Dust proof cover protects tool for extended maintenance free operation
- Auto-stop carbon brush system to prolong tool life and protect armature
- Removable side handle with depth gauge improves control and ensures accurate drilling depth
Please contact us for current pricing and availability.
Garrett Metal Detector
Garrett Metal Detector
Please contact us for current pricing and availability.
Warner Mfg. Electric Wallpaper Steamer
Electric Wall Paper Steamer makes easy work of removing all types of wall coverings.
Please contact us for current pricing and availability.
Warner Mfg. Wallcovering Perforator
Wallcovering Perforator tool designed by wallpaper professionals to make projects go smoother & faster. Helps save time and minimize problems.
Please contact us for current pricing and availability.
MK Diamond MK-101 Series 10" Wet Cutting Tile Saw
The MK-101 features a fully enclosed high torque, fan-cooled, micro V-belt drive motor with permanently lubricated, dual-sealed, heavy-duty blade shaft bearings. A multi-position motor post and cutting head enable convenient cutting of various tile sizes and the built-in water distribution system supplies water to both sides of blade. The rugged Cast aluminum blade guard and motor post with a one-piece reinforced zinc-plated steel frame. Chrome plated guide-bar assembly ensure precise cutting of tile up to 18" in length.
Please contact us for current pricing and availability.