•Clicks when you reach the torque setting.

•Ratchet-style head, 1/2" sq. drive, 19-3/8" length.

• 10-250 FT. LBS

• Drive Size: 3/8"
• Torque Increments: 1 inch lbs.
• Torque Measure: 20 to 250 inch lbs.

This puller is designed for the toughest Pitman arm jobs. They're adjustable and have rugged forged jaws shaped to fit the job. Two clamp bolts lock the jaws on the Pitman arm, ensuring a solid grip. Includes an adapter for added versatility. Both pullers cover a variety of pulling jobs. •For medium- and heavy-duty trucks. Max jaw spread: 2-1/4".

Mechanical Puller, Remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity.  • 7-Ton, Long 2-Jaw  • Max. Reach 8-3/4" Max. Spread 9-1/2"  • Screw Size 11/16"–18 x 9"  • Jaw Thickness 11/32"  • Jaw Width 1"

Mechanical Puller Remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity.  • 7-Ton, 2-Jaw (Reversible Jaws)  • Max. Reach 5" Max. Spread 9"  • Screw Size 11/16"–18 x 9"  • Jaw Thickness Upper 5/16" Lower 11/32"  • Jaw Width Upper 1" Lower 1"

Often, the biggest time-consuming part of dent removal is the removal and installation of interior panels and upholstery. This tool eliminates those steps. Simply drill a hole at the base of the dent and thread in the tool's self-tapping screw. A few sharp blows of the slide hammer will pull the dent out. •Puller is 17" long with Pyralin handle grip.  •Replaceable self-tapping screw

• Pulls harmonic balancers, timing gears, and other parts having two or three tapped holes. • Slotted holes in puller body permit cap screws to be positioned to handle bolt circle diameters from 1-1/2" to 4-5/8"

Mechanical Puller Remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity.  10-Ton, long 2-Jaw  • Max. Reach 14" Max. Spread 15-1/4"  • Screw Size 13/16"–16 x 12"  • Jaw Thickness 9/16"  • Jaw Width 1"

• Universal Hub Puller HD – the 'Final Answer" to frozen hubs, axle shafts, and other tough pulling applications. • Adjustable sliding puller legs can be positioned anywhere on the puller center hub for a true universal fit on wheel hubs with 5"-8"+ bolt circles.  • Forged puller assembly coupled with a 1" drive screw capable of 20 tons of force.  • Drive screw approved for use with an impact gun and supplied with a puller wrench designed to be struck with a hammer

Mechanical Jaw Puller, Capacity 5 Tons, Jaw Reach 5 1/2 Inches, Jaw Spread 7 Inches, Number of Jaws 2/3, Screw Size 9/16-20 x 6 15/16 Inches, Jaw Style Reversible

Mechanical Puller Remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity.

 • 7-Ton, Long 2/3-Jaw  • Max. Reach 8-3/4" Max. Spread 11"  • Screw Size 11/16"–18 x 9"  • Jaw Thickness 11/32"  • Jaw Width 1"

In state use only.  The KarTote Tow Dolly by Ultra-Fab is known as the 'industrial strength' car dolly. It has lights, sturdy fenders and it has a swivel plate base for easy cornering. Tow vehicle width 39" min. to 77" max. Maximum vehicle load 2775 lbs.

Ball joint press

• Removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins.
• Contains: 3 receiver tubes (2-3/4" I.D. x 3" O.D., 2-1/4" I.D. x 2-1/2" O.D., and 1-3/4" I.D. x 2" O.D.)
• Installation and removing adapters: 1 installing cup, 1 receiving cup, 1 installing adapter.

Designed for automotive & light truck transmissions

• Fully adjustable universal saddle with corner brackets and safety chains
• Safety overload bypass to prevent hydraulic damage
• 24” handle pivots 360° around pump
• Four industrial grade 3” casters
• Head width 7"-13" & head length 8"-11"
• adjusts from 6 7/8" low height to 31 3/4" high height
• Ship weight 117 lbs.

Our knockdown engine lifts can be taken apart in minutes making them easy to transport. They fit easily in a car trunk, a pickup truck or an elevator. On site, the lift assembles quickly and fits wherever it is needed.

JET 1-Ton Capacity 10' Lift MANUAL CHAIN HOIST -- Standard Feature found only in higher priced models. Economical hand chain hoist designed for years of trouble-free service. All steel construction with a durable powder coat finish. Lightweight, compact design for low headroom applications. Needle bearing supported load sheave for smooth operation. Completely enclosed Weston type automatic brake system for precise load spotting. Triple-spur gears provide high efficiency ratio with minimum effort. Induction hardened grade 80 load chain. Drop forged hooks with heavy-duty safety latches swivel 360° for easy rigging. Smooth rolled edge on hand chain cover prevents side pull jamming. Standard hand chain drop equals lift length. Proof tested with test certificate. Complies with OSHA, ANSI/ASME B30.16 and HST-2 standards.

JET 27" x 48" Forks, 4500-LB Capacity PALLET TRUCK -- High-quality welded steel construction with a durable powder coat finish 2-1/2" low profile design for smaller size pallet openings. Easy-to-use with single hand operation, fingertip controls and 180 degree turning radius. Extra wide poly-over-steel steer wheels provide a smooth, quiet ride with added traction and stability. Wheel bearings are double sealed and lifetime lubricated.

JET 22-1/2-Ton Capacity Hydraulic BOTTLE JACK -- JET JHJ Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening. With base and cylinder electrically welded together to assure strength and eliminate leaks, extreme temperatures do not affect them. All JHJ Series bottle jacks comply with ANSI/ASME B30.1 and PALD-1 standards.

JET 3-Ton SHORT SERVICE JACK w/ Quick-Lift Pump -- Features automatic safety overload bypass system. Full swivel, ball bearing rear casters are positioned for best load distribution and optimal maneuvering . "Quick Lift" pump feature with no load. Complies with ANSI/ASME PALD-10 standards

JET 10-Ton Capacity SCREW JACK -- Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle.