Taylor True Value Rental of Wallingford, CT

Tough, wear resistant, ductile iron baseplate offering high strength and shock resistance. This patented computer designed baseplate has a tapered bottom and edges for high speed and excellent maneuverability. Designed for the compaction of granular and mixed materials with some cohesive content in confined areas such as parking lots, highway and bridge construction, next to structures, curbs and abutments

This rammer compactor has set the standard in the construction industry. Powered by the exclusive WM 80, this 2-stroke engine is specifically designed and built for vibratory rammers and meets EPA air emission standards. This rugged rammer is designed for maximum production, performance and durability. Exclusive air filter compensation system allows for longer run time between filter changes

Designed and built with the most advanced technology, these walk behind trowels offer high quality concrete finishing plus added gyroscopic safety sensor and patent-pending engine speed limiter provide tripple protection for the operator. This unique system minimizes a runaway handles situation

The Head, Motor, and Shaft (HMS) system is extremely versatile. These high frequency flex-shaft internal vibrators can be adapted to every type of application.  Unique hybrid heads offer optimum concrete consolidation and movement. HMS systems provide reliable performance and quality concrete

Blades 14 x 3/16 x 1D Abrasive Cut Off Wheels-Concrete

Blades 14 x 3/32 x 1 Abrasive Chop Saw Wheels-Metal

Blades 14 x 1/8 x 1 Abrasive Cut Off Wheels-Metal

Double sided tungsten carbide abrasive disc is designed for any concrete cleanup task.  Hundreds of sharp tungsten carbide tips remove gummy coatings from all concrete surfaces including, paint, epoxy coatings, carpet adhesives with padding and tile adhesives.  The disc can be cleaned and used over and over again.  Tungsten Carbide Abrasive Disc mounts directly to 1-1/2 HP 175-RPM Buffer using standard rubber-backed sandpaper drive plate.

2" electric dewatering pump. Powerful pumps built with durable materials in an easy handling design. Top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low water levels and extended dry run capability

18" Gun Extension

The IMPACT™ 440 is ideally suited for residential, property maintenance, and small commercial applications. This high performance electric airless sprayer will apply all standard architectural primer, paints and coatings efficiently. Sprays: stains, latex, and other low and medium viscosity coatings. 

Gas Powered direct drive Pressure washer.  This unit is a value priced high quality high performance machine that appeals to both professionals and casual users.  Great for painters and professionals of all types.  Comes with pneumatic tires and a steel powder coated frame.  It has a axial pump rated at 2.5 GPM @ 2700 PSI with Honda GX Engine for easy starts and long life

Flairing Tool, 45° SAE Flares, model 345/150

Cutter 1/8"-2", Heavy-Duty 2-A

36" Pipe Wrench

Pipe Wrench 24"

For the tightest floor possible choose the1-1/2” x 16 Ga Porta-Nail by PNI. Porta-Nails are designed specifically for tongue and groove wood floors using the Porta-Nailer and or Portamatic flooring installation tools This fastener has been the standard for close to 50 years and is recommended for use when installing 1/ 2 “ to 3/4” Solid wood flooring on a 3/4"subfloor that is secured to concrete. The patent Porta-Nail offers the following features: Wide head wedge shaped design with well defined barbs which prevent the nail from backing out. A cupped point which enables the nail to cut through the wood thus minimizing the potential for splitting. These design features provide for the greatest impact and holding power to ensure that your floor lasts a lifetime. One pack of 1000 Porta-Nails will nail approximately 200 square feet of tongue and groove flooring. For use in Porta Nailer Models 401, 402, 501,410, 421 and 470.

PNI’s 1-1/2 In. 18 gauge L Head Flooring nail is for use with PNI’s 418A Portamatic Evolution and with all brands of nailers using an 18 ga L Flooring nail /cleat. The 1-1/2 In. nail is recommended for use with 1/2 In. to 5/8 In. engineered, bamboo and solid hardwood floors. The 18 gauge nail is a thinner than the traditional 16 gauge nail and is effective in reducing the splitting of tongues on vertical and horizontal grain bamboo and exotic hardwoods. The thinner nail will also reduce the chance of dimpling engineered and thinner hardwood floors. Our nail has sharp serrated edges to bite into the flooring and a blunt tip to help reduce the risk of slitting the hardwoods. The nails are collated with tape and are packed 1200 per pack. Each pack will cover approximately 200 sq ft of 2-1/4 In. and 350 sq ft of 3-1/4 In. flooring when following a nailing schedule of 6 to 8 inches. Our nails are produced with the finest material and will hold up for the life of the floor

The 470 Portamatic TL pneumatic flooring nailer is designed to nail ¾” thick wood flooring.  Designed to accept 1-1/ 2 or 2” Flooring nails T OR L Flooring nails. You choose the Porta-Nail flooring fastener T or L based on the style you are now using or style that is readily available to you. Operates at 70-90 PSI @ 3.5 cfm. A light tap of the mallet ensures the Porta-Nail is set tight in the proper location every time for a wood floor that stays put. The Portamatic TL is light weight; easy to use has an integrated safety to prevent accidental discharge. Porta-Nails 16 ga. flooring nails are made of the finest materials and well defined serrated barbs to provide superior holding power and will not let go.  Wide Profile Shoe is available to position Portamatic TL in front of tongue to provide balance and protection

PNI’s 418A Portamatic Evolution is designed to give you tight floors and exact nail placement for 3/8" to 5/8" Engineered and Horizontal or Vertical Grain Bamboo flooring requiring the use of an 18 ga nail to reduce the risk of splitting the tongue of the wood or dimpling the top prefinished surface. (Nails are available in lengths of 1-1/4 In. # 41801 and 1-1/2 In. # 41802) Today’s imported and prefinished floors need special attention for the nail placement and protecting the top edge of the factory finish. The 418A delivers with an 18 ga nail and adjustable base plate second to none. First, it sets against the front of the tongue, reducing the risk of damaging the top edge of the flooring. Second, it features a shim-less height adjustment through the action of an easy to adjust cam mechanism.

Multiquip concrete mixer towable, The ultimate in heavy duty mixers, ideal for mixing large aggregrate

Multiquip gasoline powered portable 3" suction/discharge Diaphragm Water Pump designed for multiple applications when moving muddy water, sludge, and water with a high percentage of solids

Move a lot of water the fast and easy way, whether it's in a basement, pool or at a construction site.  Multiquip gasoline powered portable 2" suction/discharge Centrifugal Trash Water Pump designed for multiple applications and handling water with 25% solids by weight: construction, municipal, agricultural and residential

Economical fully submersible electric utility pump designed to efficiently move water. Quiet and powerful, they are ideal for operating in confined areas, basements, on rooftops, and manholes