Taylor True Value Rental of Wallingford, CT

• Quickly trims carpet neatly at the wall and under toe kicks
• Five position folding handle moves easily in hard to reach areas
• Quick and positive vertical and horizontal adjustment
• Anti-slip rubber handle and hardened stainless steel guide
• Uses replacement blades: 10-388, 10-444

Standard 18" tail block includes a foam wall protector
Steel handle on head for better grip and repositioning
Stretch over 23-1/2'

• 2 Speed
• High Efficiency and output
• Powder Grey
• Pull Chain speed adjustment
• 3 Blade
• Steel Wire Guards for Safety
• 110 Volts

• 120 Volts
• 10 Amps
• 1/4" Collet
• 24,000 rpms

The New Brute hits 50% harder than the former.  This jack hammer was meant for heavy-duty applications like floor trenching for pipe, breaking out stairs/risers, creating openings into shafts, breaking asphalt, loosening/breaking hard packed dirt/gravel/clay and confined space work when big power is needed.

Heatstar 200,000 utilizes the natural act of warm air rising to quickly heat up 4,700 square feet. Equipped with a thermoelectric safety valve to shut the gas flow off if the flame ever goes out. Just hook-up the supplied 10ft propane hose and regulator assembly to a 100lb propane tank, then easily light the heater utilizing the factory installed Piezo igniter and enjoy the comforts of a toasty warm jobsite with the HS200CV.

Dewalt Propane Forced Air Heaters with a patent-pending Quiet Burner Technology, these heaters provide the quietest operation of any comparable output propane heaters.  The Quiet Burner Technology reduces the irritating noise of constantly running force-air jobsite heaters.  The Dewalt Forced Air Propane Heaters are equipped with a 20' hose, regulator, glove friendly controls.  Get the heat where & when you need it with Taylor True Value Rental heater rentals.

Dewalt Forced Air Kerosene Heaters offer construction professionals with reliable spot heat on the job site.  With high-output, fully-enclosed motors, glove friendly controls, and factory-installed thermostats, these heaters provide comfortable relief in freezing temperatures.  All Dewalt Forced Air Kerosene Heaters have the fuel flexibility to run on kerosene or diesel fuel.  Get the heat where & when you need it with Taylor True Value Rental heater rentals.

Kubota B26 tractor, 4 wheel drive, hydrostatic transmission with a 6 ft york rake.

Take care of your outdoor projects with Kubota's B26 Diesel Tractor!  You can tackle the toughest jobs with the Kubota B26 Tractor, Loader, Backhoe. From landscaping to construction, experience maximum versatility in Kubota's B26TLB utility tractor. Loaded with a Kubota diesel engine, standard 4WD and sloped loader arms and hood designed for improved visibility on the work site, the B26 takes productivity to the next level.  Whether you are a contractor or a do-it-yourselfer, we have the equipment you need to get the job done. Trailer rental and delivery are available.

• 2 HP 110V Twin Stack Compressor,
• 4 CFM @ 90 PSI,
• 62 lbs,
• Air Compressor dimensions: 20"X 15"X17"
• Tank Capacity: 4.3 gallons

The most economical, safe and labor saving method of raising materials like roofing shingles to the roof on residential and commercial jobsites. Highly efficient hoist is more cost-effective than a crane, forklift or boom truck.

Bring your empty propane tanks in and get them refilled right here in store!

Propane Refills! All Sizes tanks!

• Why would you exchange your propane tanks when you can have them refilled at a lower cost?!
• Most exchange grill tanks are not filled completely, with a net weight of only 15 to 17 pounds, even though they can be refilled to 20lbs. At Taylor Rental of Wallingford, all grill tanks are refilled to their maximum 20lb. capacity! That’s 1/3 more gas than you get from most exchange tanks for less money and longer grilling time!
• Also, refilling your tank at Taylor Rental of Wallingford will not be exchanged for an older tank!
• We fill your tank in a matter of minutes! No more long waits while you stand around for some store clerk to come and open the cabinet to exchange your tank.
• We fill Forklift tanks too!

Simple to understand, and easy to use, the DD 150-U Diamond Coring System allows the operator to drill by hand or with a core stand up to 5" thru concrete, blocks and bricks.

The Attix 50 HEPA is the new and compact generation of the Attix line - representing the new possiblility of achieving superior suction power in a durable and flexible solution.

The Model No. CT-859 is a fine, all purpose gun tacker that has been made even better by a handle hold-down clip, an improved staple pusher, and the jaw with the claw. It takes staples up to 9/16”

APPLICATIONS

Upholstering. Light wood assemblies. Carpet laying, as well as other production-shop applications.

•Clicks when you reach the torque setting.

•Ratchet-style head, 1/2" sq. drive, 19-3/8" length.

• 10-250 FT. LBS

• Drive Size: 3/8"
• Torque Increments: 1 inch lbs.
• Torque Measure: 20 to 250 inch lbs.

This puller is designed for the toughest Pitman arm jobs. They're adjustable and have rugged forged jaws shaped to fit the job. Two clamp bolts lock the jaws on the Pitman arm, ensuring a solid grip. Includes an adapter for added versatility. Both pullers cover a variety of pulling jobs. •For medium- and heavy-duty trucks. Max jaw spread: 2-1/4".

Mechanical Puller, Remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity.  • 7-Ton, Long 2-Jaw  • Max. Reach 8-3/4" Max. Spread 9-1/2"  • Screw Size 11/16"–18 x 9"  • Jaw Thickness 11/32"  • Jaw Width 1"

Mechanical Puller Remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity.  • 7-Ton, 2-Jaw (Reversible Jaws)  • Max. Reach 5" Max. Spread 9"  • Screw Size 11/16"–18 x 9"  • Jaw Thickness Upper 5/16" Lower 11/32"  • Jaw Width Upper 1" Lower 1"

Often, the biggest time-consuming part of dent removal is the removal and installation of interior panels and upholstery. This tool eliminates those steps. Simply drill a hole at the base of the dent and thread in the tool's self-tapping screw. A few sharp blows of the slide hammer will pull the dent out. •Puller is 17" long with Pyralin handle grip.  •Replaceable self-tapping screw

• Pulls harmonic balancers, timing gears, and other parts having two or three tapped holes. • Slotted holes in puller body permit cap screws to be positioned to handle bolt circle diameters from 1-1/2" to 4-5/8"