Product Catalog

  • Manufacturer: Essex Silver Line
  • Model Number: SL-1218R

The SL-1218R will add a different dimension to your fleet of floor care machines. The design allows the DIYer to accomplish the work of a rotary polisher without knowing how to run one!

Please contact us for current pricing and availability.

The Pearl Easy Hammer Trolley carries the weight of the demolition hammer, allowing the user to more easily and safely remove floor-tiles, vinyl, cork and residue from concrete and wooden surfaces. It can also be used when breaking rocks, blocks, concrete and sandstone. The ergonomic design with built-in shock absorption reduces operator fatigue, back strain and the incidence of injuries.

*Includes Bosch 1135K Hammer

Please contact us for current pricing and availability.

  • Model Number: 19400
  • Wide bit for shaping tile.
  • Carbide cutting edge cuts tile up to 1/2" thick.
  • Balanced forged steel construction.
  • 5/8" wide offset jaws open with return spring.
  • Measures 8" overall.

Please contact us for current pricing and availability.

  • Manufacturer: ROBERTS/Q.E.P. CO., INC
  • Model Number: 10-100
  • Specially designed for loop pile carpet
  • Wide head reduces dishing in seam area
  • Durable and lightweight superior die cast handle
  • Get stronger seams and increased hot melt transfer into carpet back with stationary roller shaft

Please contact us for current pricing and availability.

  • Manufacturer: ROBERTS/Q.E.P. CO., INC
  • Model Number: 10-616
  • Quickly trims carpet neatly at the wall and under toe kicks
  • Five position folding handle moves easily in hard to reach areas
  • Quick and positive vertical and horizontal adjustment
  • Anti-slip rubber handle and hardened stainless steel guide
  • Uses replacement blades: 10-388, 10-444

Please contact us for current pricing and availability.

  • Manufacturer: ROBERTS/Q.E.P. CO., INC
  • Model Number: 10-239

Standard 18" tail block includes a foam wall protector
Steel handle on head for better grip and repositioning
Stretch over 23-1/2'

Please contact us for current pricing and availability.

  • Manufacturer: Clarke Floor Maintenance

The Attix 50 HEPA is the new and compact generation of the Attix line - representing the new possiblility of achieving superior suction power in a durable and flexible solution.

Please contact us for current pricing and availability.

  • Manufacturer: Makita Power Tools
  • Model Number: 9403

Powerful 11.0 AMP Motor; 84dB

Please contact us for current pricing and availability.

  • Manufacturer: Bosch Power Tools
  • Model Number: 1293D

3.2 Amps, 11,000 OPM ensures fast, smooth results on all surfaces. Rubberized paper clamps for firm, no-slip grip. Sander also accepts stick-on paper. Dual row bearing design for exceptional smoothness. Through-the-pad dust extraction pulls dust away from work surface to maximize sanding efficiency and extend paper life.

Please contact us for current pricing and availability.

  • Manufacturer: Bosch Power Tools
  • Model Number: 1297D

2.0 Amp Motor, 12,000 OPM ensures fast, smooth results on all surfaces. SheetLoc Sandpaper Attachment System pulls regular sandpaper flat and tight giving it the benefits of adhesive "stick-on" paper -- fast and easy installation; efficient, uniform sanding, and longer paper life, but without stick-on paper's nearly twice-the-price cost.
    Rubberized paper clamps — for firm, no-slip grip
    Also accepts stick-on paper.
    Through-the-pad dust collection — For cleaner workspace
    Bosch Microfiler Dust Canister with integrated paper filter — Optimal filtering system of fine dust - Captures particles as small as a 1/2 micron.
    Flush sanding ability — Sands close to vertical surfaces on three sides
    Dust sealed rocker switch — Convenient, easy off and on, keeps dust out
    3-Point counterbalance — Low

Please contact us for current pricing and availability.

  • Manufacturer: Dri-Eaz

The HydroSensor Moisture Probe is designed to detect moisture in carpets, cushion, floors, walls, and furniture.

Please contact us for current pricing and availability.

  • Manufacturer: ROBERTS/Q.E.P. CO., INC
  • Model Number: 10-40

Designed for undercutting in hard to reach areas

•Cuts inside corners

•Die cast aluminum components

•Adjustable blade height with index marks for easy adjustments

•Fits all 4 1/2" wood blades with arbor

 

Please contact us for current pricing and availability.

  • Manufacturer: Windsor
  • Model Number: M13

Operation Easy to use fully adjustable handle height system with easy cord release. Large 5-inch non-marking wheels for easy transport. Safety

Mechanical safety interlock to prevent accidental start-ups. Built in circuit breaker to protect motor. Durability

Rugged cast aluminum base and switch housing with non-marking bumper to protect the machine and facility. Heavy duty steel triple planetary gearbox for smoother operation and longer life. Performance

High torque, 66 frame induction motor for trouble free operation. Dual capacitor for high efficiency operation. Additional Features

High Mounted Handle Lock/Height Adjustment. Heavy Duty Construction, Non-marking PVC Bumper. Dual Main Switch Levers. Thumb Activated Safety Interlock.

 

Please contact us for current pricing and availability.

  • Model Number: PCP 17

Contractor models feature a high polish finish for easy cleaning, 3 idler planetary gear unit for durability, tote-a-brush.

Please contact us for current pricing and availability.

  • Manufacturer: Clarke Floor Maintenance
  • Model Number: 302004230

8 Gallon wet/dry tank vacuum with accessory plug with auto start/stop

Please contact us for current pricing and availability.

  • Manufacturer: Nobles
  • Model Number: 9007502

Clean spots before they become stains with this portable spot extractor.
Clean small spots on carpet, upholstery and many other applications.
Ensure complete water recovery, using a durable metal hand tool with the EX-SPOT-2 spot extractor's see-through window

Please contact us for current pricing and availability.

  • Manufacturer: Virginia Abrasives
  • Model Number: 421-80017

Double sided tungsten carbide abrasive disc is designed for any concrete cleanup task.  Hundreds of sharp tungsten carbide tips remove gummy coatings from all concrete surfaces including, paint, epoxy coatings, carpet adhesives with padding and tile adhesives.  The disc can be cleaned and used over and over again.  Tungsten Carbide Abrasive Disc mounts directly to 1-1/2 HP 175-RPM Buffer using standard rubber-backed sandpaper drive plate.

Purchase Price
  • $260.00

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 705782
  • Model Number: 42640

For the tightest floor possible choose the1-1/2” x 16 Ga Porta-Nail by PNI. Porta-Nails are designed specifically for tongue and groove wood floors using the Porta-Nailer and or Portamatic flooring installation tools This fastener has been the standard for close to 50 years and is recommended for use when installing 1/ 2 “ to 3/4” Solid wood flooring on a 3/4"subfloor that is secured to concrete. The patent Porta-Nail offers the following features: Wide head wedge shaped design with well defined barbs which prevent the nail from backing out. A cupped point which enables the nail to cut through the wood thus minimizing the potential for splitting. These design features provide for the greatest impact and holding power to ensure that your floor lasts a lifetime. One pack of 1000 Porta-Nails will nail approximately 200 square feet of tongue and groove flooring. For use in Porta Nailer Models 401, 402, 501,410, 421 and 470.

Please contact us for current pricing and availability.

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 142661
  • Model Number: 42623

For the tightest floor possible choose the 2” x 16 Ga Porta-Nail by PNI. Porta-Nails are designed specifically for nailing tongue and groove wood floors using the Porta-Nailer and or Portamatic flooring installation tools This fastener has been the standard for close to 50 years and is recommended for use when installing 1/ 2 “ to 1” Solid wood flooring on a subfloor that is built with joists. The patent Porta-Nail offers the following features: Wide head wedge shaped design with well defined barbs which prevent the nail from backing out. A cupped point which enables the nail to cut through the wood thus minimizing the potential for splitting. These design features provide for the greatest impact and holding power to ensure that your floor lasts a lifetime. One pack of 1000 Porta-Nails will nail approximately 200 square feet of tongue and groove flooring. For use in Porta Nailer Models 401, 402, 501,410, 421 and 470.

Please contact us for current pricing and availability.

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 128358
  • Model Number: 41802

PNI’s 1-1/2 In. 18 gauge L Head Flooring nail is for use with PNI’s 418A Portamatic Evolution and with all brands of nailers using an 18 ga L Flooring nail /cleat. The 1-1/2 In. nail is recommended for use with 1/2 In. to 5/8 In. engineered, bamboo and solid hardwood floors. The 18 gauge nail is a thinner than the traditional 16 gauge nail and is effective in reducing the splitting of tongues on vertical and horizontal grain bamboo and exotic hardwoods. The thinner nail will also reduce the chance of dimpling engineered and thinner hardwood floors. Our nail has sharp serrated edges to bite into the flooring and a blunt tip to help reduce the risk of slitting the hardwoods. The nails are collated with tape and are packed 1200 per pack. Each pack will cover approximately 200 sq ft of 2-1/4 In. and 350 sq ft of 3-1/4 In. flooring when following a nailing schedule of 6 to 8 inches. Our nails are produced with the finest material and will hold up for the life of the floor

Please contact us for current pricing and availability.

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 705816
  • Model Number: 470

The 470 Portamatic TL pneumatic flooring nailer is designed to nail ¾” thick wood flooring.  Designed to accept 1-1/ 2 or 2” Flooring nails T OR L Flooring nails. You choose the Porta-Nail flooring fastener T or L based on the style you are now using or style that is readily available to you. Operates at 70-90 PSI @ 3.5 cfm. A light tap of the mallet ensures the Porta-Nail is set tight in the proper location every time for a wood floor that stays put. The Portamatic TL is light weight; easy to use has an integrated safety to prevent accidental discharge. Porta-Nails 16 ga. flooring nails are made of the finest materials and well defined serrated barbs to provide superior holding power and will not let go.  Wide Profile Shoe is available to position Portamatic TL in front of tongue to provide balance and protection

Please contact us for current pricing and availability.

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 705796
  • Model Number: 461

The easy to use 461 Flooring Stapler is the fast and cost effective way to secure 1/ 4” to 1/2” Hardwood and Engineered Wood Flooring. Engineered floors are easy to install and stay in place when stapled into proper sub floor systems. The 461 Stapler uses 1” or 1-1/4” 18 ga x ¼” crown staples .These staples provides superior holding power and prevents de-lamination of engineered flooring. The tool is set for the right angle to ensure your stapler hits the right spot every time. Make sure that you check to insure that the staple is in the correct place and that there is no damage to the prefinished surface. Some floors may require a Stapler with an adjustable base. Always follow the flooring manufacturer’s installation guidelines. The Stapler is shipped with a front end nose accessory that allows you to convert the tool to a conventional stapler for picture frames, upholstery, trim or any application where a stapler will work. Requires 7

Please contact us for current pricing and availability.

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 128359
  • Model Number: 418A

PNI’s 418A Portamatic Evolution is designed to give you tight floors and exact nail placement for 3/8" to 5/8" Engineered and Horizontal or Vertical Grain Bamboo flooring requiring the use of an 18 ga nail to reduce the risk of splitting the tongue of the wood or dimpling the top prefinished surface. (Nails are available in lengths of 1-1/4 In. # 41801 and 1-1/2 In. # 41802) Today’s imported and prefinished floors need special attention for the nail placement and protecting the top edge of the factory finish. The 418A delivers with an 18 ga nail and adjustable base plate second to none. First, it sets against the front of the tongue, reducing the risk of damaging the top edge of the flooring. Second, it features a shim-less height adjustment through the action of an easy to adjust cam mechanism.

Please contact us for current pricing and availability.

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 627711
  • Model Number: 402

The easy to use 402 Porta Nailer is the finest most versatile flooring nailer on the market and comes ready to angle nail 5/8, 3/4 and 33/32 In. thick tongue and groove flooring. PNI’s “Preferred-Seating" System uses an exclusive ratcheting ram to ensure nails are properly seated and flooring strips are tightly driven together. The patented “anti-split” nail cuts through wood without splitting your floor and three lengths of nails will insure you have the right fastener for the job. The nail’s wide head and grapple barb design provides superior holding power. Porta-Nailers are world-renowned by professionals and do-it yourselfers alike and are designed to protect today’s Pre Finished Surfaces and positions easily on your wood floor to insure proper nail placement.

Please contact us for current pricing and availability.

  • Manufacturer: Essex Silver Line
  • Model Number: U2

The U2 has a 10" nose and 1.5" clearance so the DIYER can sand under toe kicks and baseboard heat

Please contact us for current pricing and availability.